Another Quick Gift Card Holder

Here’s one more quick and easy gift card holder using the measurements from my original card holder of the Grinch.  Please refer to my Dec 7, 2021 blog post of the Grinch Card Holder. 

Don’t forget to subscribe to my blog by entering your email address located on the right side of my home page.  I hope you like this card.  Please feel free to leave a comment if you do (located on left side of page). 

You can contact me at stampingnonostyle@gmail.com if you have any questions or in need of a catalog.  I would love to be your Stampin’ Up! Demonstrator.

Happy Stamping,

Teresa (AKA “NoNo” by my Grandchildren)

Don’t Stop Believin’ Gift Card Holder

After I made the Grinch Gift Card Holder, I realized I needed to make a couple more with the same measurements.  So, here’s one using the Don’t Stop Believin’ stamp set that is sadly retired.  For measurements of the card holder, please refer to my Dec 7, 2021 post of the Grinch Card Holder. 

Don’t forget to subscribe to my blog by entering your email address located on the right side of my home page.  I hope you like this card.  Please feel free to leave a comment if you do (located on left side of page). 

You can contact me at stampingnonostyle@gmail.com if you have any questions or in need of a catalog.  I would love to be your Stampin’ Up! Demonstrator.

Happy Stamping,

Teresa (AKA “NoNo” by my Grandchildren)

Stampin’ Up! Great Tidings Christmas Card

Getting down to creating my last stack of Christmas cards.  I am one that cannot make a lot of cards that are the same.  I guess I get bored!!  I really enjoy using different stamps and dies when I make Christmas cards. I’m not sure you can see clearly in the pictures that I had embossed the metallic gold frame using the Timber embossing folder.  Each picture shows the embossed grain going in a different direction. I love how it gives more texture to the card.  Below is the list of Stampin’ Up! items I used to create this card. 

Products used can be purchased through my Stampin’ Up! on-line store, unless otherwise stated.  You can find my website information under SHOP.

Don’t forget to subscribe to my blog by entering your email address located on the right side of my home page.  I hope you like this card.  Please feel free to leave a comment if you do (located on left side of page). 

You can contact me at stampingnonostyle@gmail.com if you have any questions or in need of a catalog.  I would love to be your Stampin’ Up! Demonstrator.

Happy Stamping,

Teresa (AKA “NoNo” by my Grandchildren)

Supplies:

  • Stamp:  Great Tidings #156347, For Unto Us
  • Dies:  Wise Men Tidings #156381, Snow Time #153564, Potted Succulents #154330
  • Embossing Folder:  Timber #156406
  • Cardstock:  Misty Moonlight, Basic White
  • DSP:  Tidings of Christmas #155718, Brushed Metallic #153524, BeDazzling (retired), Snowflake Splendor (retired)
  • Stampin’ Ink Pad:  Evening Evergreen, VersaMark #102283
  • Embossing Powder:  Metallics #155555
  • Cut & Emboss Machine #149653
  • Adhesive of choice, Foam Adhesive #152815 and Stampin’ Up! Dimensionals #104430
  • Embellishments:  Holiday Rhinestone #150457
  • Bone folder #102300

Quick Card Using Deer Builder Punch

Here’s another card I created for my senior’s card making class.  In my original design, I was planning to use Real Red cardstock as my card base, but then I remembered I had non-Stampin’ Up! card base that had glitter (I love glitter) around the edges and loved the look.  Below is the list of Stampin’ Up! items used to create this card. 

Products used can be purchased through my Stampin’ Up! on-line store, unless otherwise stated.  You can find my website information under SHOP.

Don’t forget to subscribe to my blog by entering your email address located on the right side of my home page.  I hope you like this card.  Please feel free to leave a comment if you do (located on left side of page). 

You can contact me at stampingnonostyle@gmail.com if you have any questions or in need of a catalog.  I would love to be your Stampin’ Up! Demonstrator.

Happy Stamping,

Teresa (AKA “NoNo” by my Grandchildren)

Supplies:

  • Stamp:  Peaceful Deer #156891
  • Die:  Tailor Made Tags #155563
  • Cardstock:  Basic White, Basic Black
  • DSP:  Peaceful Prints (retired)
  • Stampin’ Ink Pad:  Sahara Sand, Memento
  • Cut & Emboss Machine #149653
  • Adhesive of choice and Stampin’ Up! Dimensionals #104430
  • Linen Thread #104199
  • Bone folder #102300

Grinch Gift Card Holder

I can’t begin to tell you how many times we’ve watched the movie, “How the Grinch Stole Christmas”.  It’s one of our must watch movies during the holidays.  It’s up there with “It’s a Wonderful Life” starring Jimmy Stewart.  Did you know that movie was made in 1946?  Just a little fun fact.

Here’s a gift card holder created in honor of The Grinch.  The holder is super easy to create.  It took more time for me to pick out which DSP to use.

Products used can be purchased through my Stampin’ Up! on-line store, unless otherwise stated.  You can find my website information under SHOP.

Don’t forget to subscribe to my blog by entering your email address located on the right side of my home page.  I hope you like this card.  Please feel free to leave a comment if you do (located on left side of page). 

You can contact me at stampingnonostyle@gmail.com if you have any questions or in need of a catalog.  I would love to be your Stampin’ Up! Demonstrator.

Happy Stamping,

Teresa (AKA “NoNo” by my Grandchildren)

Supplies:

  • Stamps:  Christmas Means More (retired), Tidings & Trimmings #153503
  • Dies:  Potted Succulents #154330, Layering Circles #151770
  • Cardstock:  Basic White, Evening Evergreen, Real Red, Granny Apple Green
  • DSP:  Tidings of Christmas #155718, Silver Foil #156457
  • Stampin’ Ink Pad:  Real Red
  • Cut & Emboss Machine #149653
  • Adhesive of choice, Tear and Tape #154031 and Stampin’ Up! Dimensionals #104430
  • Baker’s Twine #155475
  • Bone folder #102300

Cutting Instructions (measurements in inches):

  • Card base:  4 ¼ x 11, score at 2, 7 ½
  • DSP, 4 x 3 ¼, 4 x 1 ¾
  • Basic White (inside), 4 x 3 ¼
  • Real Red, scrap scalloped circle, approximately 3”
  • Basic White, scrap for fur, approximately 1 ½ and circle with sentiment, approximately 3”
  • Granny Apple Green, scrap for Grinch’s fingers, approximately 2 ½ x 2 ½
  • Real Red for the arm, approximately ½ x 1 ½
  • Silver Foil, ½ x ½
  • Twine, approximately 10 inches, enough to tie a double bow

Instructions:

  • Tip:  I used my bone folder and ran it across the center of the 2” flap first before adding tear and tape to both sides of the edge.  Doing this will help prevent such a tight fit when you insert the gift card. 
  • Stamp your sentiment on the inside Basic White.
  • Stamp your outside sentiment on scrap Basic White. 
  • Using your Cut & Emboss machine die cut the Basic White fur, Granny Apple Green hands, Real Red circle and Basic White circle.
  • Now you’re ready to assemble the gift card.
  • Tip:  When adhering the ornament, only add adhesive to the top portion so it adheres only to the top flap.

Fussy Cut Polar Bear from Penguin Playmates DSP to Create a Card

Whew!  What a Thanksgiving holiday we had!  I hope everyone had a wonderful holiday!  The last of our house guests left earlier this week and the house is so quiet.  Now that my scrapbook room is back in order, I’m getting back in the groove of making cards.  I always put away my crafting items when my small grand kids come to stay so as to not temp little fingers from investigating and hurting themselves.  I decided to work on cards for my upcoming senior’s card making class.  This was an easy card to create.  Majority of my time was spent fussy cutting the polar bear.  The card base is not a Stampin’ Up! product, but thought it went well with the polar bear.  It may be difficult to see in the picture, but I used my blending brush to soften the background.  I felt it was too much white and the bear didn’t stand out until I blended the background with Balmy Blue.  Below is the list of Stampin’ Up! items used to create this card.

Products used can be purchased through my Stampin’ Up! on-line store, unless otherwise stated.  You can find my website information under SHOP.

Don’t forget to subscribe to my blog by entering your email address located on the right side of my home page.  I hope you like this card.  Please feel free to leave a comment if you do (located on left side of page). 

You can contact me at stampingnonostyle@gmail.com if you have any questions or in need of a catalog.  I would love to be your Stampin’ Up! Demonstrator.

Happy Stamping,

Teresa (AKA “NoNo” by my Grandchildren)

Supplies:

  • Stamps:  Peaceful Boughs (retired), Merry Moose (retired), Peaceful Deer #156891
  • Dies:  Stitched So Sweetly #151690
  • Cardstock:  Basic White, Basic Gray
  • DSP:  Penguin Playmates (retired)
  • Stampin’ Ink Pad:  Cherry Cobbler, Balmy Blue, Just Jade
  • Cut & Emboss Machine #149653
  • Adhesive of choice and Stampin’ Up! Dimensionals #104430
  • Paper Snips Scissors #103579
  • Bone folder #102300

Gift Tags Using Stampin’ Up! Delivering Cheer

My sister is here visiting and will be spending Thanksgiving with us!  It’s been awhile since we’ve been able to celebrate Thanksgiving together and I’m looking forward to some fun and laughter.  She is one of those sweet and thoughtful people that sends a small gift to her doctor’s office over the holidays to let them know how much they are appreciated.  Since she has a sister who is a paper crafter, I couldn’t let her buy a boring gift tag! This is a Pinterest inspired gift tag.   

Our other family members will be showing up within the next few days, so I will not be making a blog post next week.  I want to spend as much time as possible with my family while they are here.  Please have a wonderful holiday and please-please be safe if you’re traveling!

Products used can be purchased through my Stampin’ Up! on-line store, unless otherwise stated.  You can find my website information under SHOP.

Don’t forget to subscribe to my blog by entering your email address located on the right side of my home page.  I hope you like this card.  Please feel free to leave a comment if you do (located on left side of page). 

You can contact me at stampingnonostyle@gmail.com if you have any questions or in need of a catalog.  I would love to be your Stampin’ Up! Demonstrator.

Happy Stamping,

Teresa (AKA “NoNo” by my Grandchildren)

Supplies Used on Each Gift Tag:

  • Stamps:  Delivering Cheer #156368, Peaceful Deer #156891
  • Punches:  Tailored Tag #145667, Delightful Tag #149518, Label Me Lovely #151296
  • Cardstock:  Basic White, Cherry Cobbler
  • DSP:  Be Dazzling (retired)
  • Stampin’ Ink Pad:  Memento, Cherry Cobbler, Basic Gray, Balmy Blue
  • Stampin’ Up! Blends: Cherry Cobbler
  • Adhesive of choice, glue dots #103683
  • Ribbon:  Jute (non-Stampin’ Up!)
  • Other:  Wink of Stella, Blending Brushes

Additional Supplies Used on this Gift Tag:

  • DSP:  Tidings of Christmas
  • Stampin’ Up! Blends:  Pool Party, Crumb Cake, Evening Evergreen, Soft Suede, Soft Succulent, Smoky Slate
  • Ribbon:  Evening Evergreen #155722

Additional Supplies Used on this Gift Tag:

  • Stampin’ Up! Blends:  Shaded Spruce, Smoky Slate, Crumb Cake
  • Ribbon:  Black & White Gingham #156485

Additional Supplies Used on this Gift Tag:

  • Stampin’ Up! Blends:  Shaded Spruce, Soft Suede
  • Ribbon:  Cherry Cobbler & Gold Ribbon #156312
  • Embellishments:  Wonderful Gems #153536

Cutting Instructions (measurements in inches):

  • Cherry Cobbler, 2 x 6 ½
  • Basic White 2 ½ x 4 ¾
  • DSP Be Dazzling, 2 ½ x ½
  • DSP scrap enough to fussy cut the dress, approximately 2 ½ x 2 ½
  • Ribbon, approximately 6 inches, enough to tie a small bow
  • Jute, approximately 9 inches

My Tailored Tag punch is probably the most used punch that I have.  It’s wonderful to punch out the ribbon banner.

I thought the Basic White was too bright, so I used Balmy Blue ink and my blending brush to soften the look and then stamped off the snowflakes in Balmy Blue ink.  I still felt it needed something else so I decided to add wink of stella to the tree, presents and greenery arrangement.

Design a site like this with WordPress.com
Get started